Global Government Tenders

Most trusted source for Tendering Opportunities and Business Intelligence since 2002

Estonia Healthcare Equipment and Services Tenders and Bids

Get access to latest Estonia healthcare equipment services tenders and bids. Find business opportunities and government contracts for Estonia healthcare equipment services tenders, government healthcare equipment services tenders Estonia, x-ray equipment, Estonia clinical trial tenders, Estonia medical equipment, Estonia public health services tenders, Estonia healthcare consulting tenders. Find Estonia healthcare equipment services bids, tenders, procurement, RFPs, RFQs, ICBs. The economy of Estonia is an advanced economy and the country is a member of the European Union and of the eurozone. On 1 January 2011, Estonia adopted the euro and became the 17th eurozone member state. The privatisation of state-owned firms is virtually complete, with only the port and the main power plants remaining in government hands. In the second quarter of 2013, the average monthly gross wage in Estonia was €976. This figure has grown consistently to €1,310 as of 2018 and to €1,586 as of June 2021. Estonia is nearly energy-independent, supplying over 90% of its electricity needs with locally mined oil shale. Alternative energy sources such as wood, peat, and biomass make up approximately 9% of primary energy production. Estonia imports needed petroleum products from western Europe and Russia. Oil shale energy, telecommunications, textiles, chemical products, banking, services, food and fishing, timber, shipbuilding, electronics, and transportation are key sectors of the economy. The ice-free port of Muuga, near Tallinn, is a modern facility featuring good transshipment capability, a high-capacity grain elevator, chill/frozen storage, and brand-new oil tanker off-loading capabilities. The railroad serves as a conduit between the West, Russia, and other points to the East. Estonia today is mainly influenced by developments in Finland, Russia, Sweden and Germany – the four main trade partners. The government has significantly increased its spending on innovation since 2016, with €304 million aimed to stimulate research and development in 2017. A medical device is any device intended to be used for medical purposes. Significant potential for hazards are inherent when using a device for medical purposes and thus medical devices must be proved safe and effective with reasonable assurance before regulating governments allow marketing of the device in their country. Medical equipment is designed to aid in the diagnosis, monitoring or treatment of medical conditions. Diagnostic equipment includes medical imaging machines, used to aid in diagnosis. Examples are ultrasound and MRI machines, PET and CT scanners, and x-ray machines. Treatment equipment includes infusion pumps, medical lasers and LASIK surgical machines. Life support equipment is used to maintain a patient's bodily function. This includes medical ventilators, incubators, anaesthetic machines, heart-lung machines, ECMO, and dialysis machines. Medical monitors allow medical staff to measure a patient's medical state. Monitors may measure patient vital signs and other parameters including ECG, EEG, and blood pressure. The delivery of healthcare services from primary care to secondary and tertiary levels of care is the most visible part of any healthcare system, both to users and the general public. There are many ways of providing healthcare in the modern world. The place of delivery may be in the home, the community, the workplace, or in health facilities. The most common way is face-to-face delivery, where care provider and patient see each other in person. This is what occurs in general medicine in most countries. However, with modern telecommunications technology, in absentia health care or Tele-Health is becoming more common. This could be when practitioner and patient communicate over the phone, video conferencing, the internet, email, text messages, or any other form of non-face-to-face communication. Practices like these are especial applicable to rural regions in developed nations. These services are typically implemented on a clinic-by-clinic basis.

GlobalTenders, one of the largest and most trusted sources for Tendering opportunities and Business Intelligence. With the aim of making information easier to access, Global Tenders was established as a business connect platform in 2002. GlobalTenders has more than two decades of experience in tender business.

On GlobalTenders you'll find the most comprehensive and authentic Tenders Database. GlobalTenders collects tender notices, contract awards, procurement opportunities from various sources. Some of sources for Australia Government Contracts and Tenders are:

Government Tenders Sites
Ministry Tenders Sites
Government Tender Bulletins
eTendering System
Central Government Tenders Websites
Public Procurement System
eTender Portal
Tender Periodicals
Government Eprocurement Sites
Government Department Tenders Sites
State Government Tenders Sites
Municipal Corporation Tenders

Global Tenders, through its proprietary algorithms offers an advanced yet simple to use search option through which the notices can be filtered according to the keywords, sectors, regions, product classifier, deadline, estimated cost with an option to export the results or set as daily email alerts.

Invitation to tender

An invitation to tender (ITT, otherwise known as a call for bids or a request for tenders) is a formal, structured procedure for generating competing offers from different potential suppliers or contractors looking to obtain an award of business activity in works, supply, or service contracts, often from companies who have been previously assessed for suitability by means of a supplier questionnaire (SQ) or pre-qualification questionnaire (PQQ).

The term "notice inviting tenders" (NIT) is often used in purchasing in India.

An ITT differs from a request for quotation (RFQ) or a request for proposal (RFP), in which case other reasons (technology used, quality) might cause or allow choice of the second best offer. An RFP is a request for a price from a buyer but the buyer would also expect suggestions and ideas on how the project work should be done. RFPs are thus focused on more than just pricing/cost, they entail a bit of consulting from the contractor or vendor. The closest equivalent to an ITT in the mainstream private sector is an RFP which, since public money is not involved, typically has a less rigid structure.

Typology

Open tenders, open calls for tenders, or advertised tenders are open to all vendors or contractors who can guarantee performance.
Restricted tenders, restricted calls for tenders, or invited tenders are only open to selected pre-qualified vendors or contractors. The tender stage may form part of a two-stage process, the first stage of which (as in the expression-of-interest (EOI) tender call) was itself advertised, resulting in a shortlist of selected suitable vendors.
Sole source tenders, where only one potential supplier is invited to submit a tender.

The reasons for using restricted tenders differ in scope and purpose. Restricted tenders can come about because of:
- confidentiality issues (such as in military contracts)
- the need for expeditiousness (as in emergency situations)
- a need to exclude tenderers who do not have the financial or technical capabilities to fulfill the requirements.

A sole source tender may be used where there is essentially only one suitable supplier of the services or product.

Other types of proposal and terms in use include:
EOI - expression of interest
IFB - invitation for bids
ITN - Invitation to negotiate
ITV - invitation to vendors
RFA - request for applications
RFD - request for documentation
RFI - request for information
RFO - request for offers
RFP - request for proposal
RFQ - request for quotation or request for qualifications
RFS - request for services

The online tender process typically involves the following steps:

Publication of tender notice: The procurement agency publishes the tender notice on their website and other online platforms.
Bid submission: Suppliers access the tender documents online, prepare their bids, and submit them electronically before the deadline.
Bid evaluation: The procurement agency evaluates the bids electronically based on the evaluation criteria specified in the tender documents.
Contract award: The contract is awarded to the successful bidder, and the procurement agency notifies all bidders of the outcome.

Note that the tender process may vary depending on the procurement agency and the type of tender. Therefore, it is essential to carefully review the tender documents and follow the instructions provided.

Some portion of this article uses material from the Wikipedia article "Invitation to tender", which is released under the Creative Commons Attribution-Share-Alike License 3.0. Tags: Estonia Healthcare Equipment and Services Tenders, Estonia Healthcare Equipment and Services Bids, Estonia Healthcare Equipment and Services Global Tenders, Estonia Healthcare Equipment and Services International Tenders, RFPs, RFQs, EOI, ICBs, Contract awards.
Summary:
Washer For Endoscopes (Repeat Procurement)
Country:
Estonia
 
Notice Type:
Invitation for Bids
Deadline:
02 Oct 2023
Summary:
Reproductive Medicine Laboratory Supplies
Country:
Estonia
 
Notice Type:
Invitation for Bids
Deadline:
10 Oct 2023
Summary:
Disposable Respiratory System Ventilation Devices
Country:
Estonia
 
Notice Type:
Invitation for Bids
Deadline:
23 Oct 2023
Summary:
Enmg Device And Consumables
Country:
Estonia
 
Notice Type:
Invitation for Bids
Deadline:
10 Oct 2023
Summary:
Liquid-Based Cytology (Lbc) Equipment And Consumables
Country:
Estonia
 
Notice Type:
Invitation for Bids
Deadline:
20 Oct 2023
Summary:
Negative Pressure Wound Treatment Systems
Country:
Estonia
 
Notice Type:
Invitation for Bids
Deadline:
03 Oct 2023
Summary:
Purchase Of Work Clothes And Personal Protective Equipment Ii
Country:
Estonia
 
Notice Type:
Invitation for Bids
Deadline:
03 Oct 2023
Summary:
Description Of Radiological Studies
Country:
Estonia
 
Notice Type:
Invitation for Bids
Deadline:
05 Oct 2023
Summary:
Vacuum Probes. Accessories For Blood And Urine Tests
Country:
Estonia
 
Notice Type:
Invitation for Bids
Deadline:
29 Sep 2023
Summary:
Full Automatic Plasma Separator Maintenance And Accessories
Country:
Estonia
 
Notice Type:
Invitation for Bids
Deadline:
06 Oct 2023

Key Features

  • • 50000 + notices daily
  • • Daily Email alerts
  • • Personal dashboard
  • • Website Access
  • • Weekly Excel
  • • Market Reports
  • • Analytics
  • • Customer support

Quick Links