Tender Info 247

Most trusted source for Tendering Opportunities and Business Intelligence since 2002

Canada Aviation Tenders and Bids

Get access to latest Canada aviation tenders and bids. Find business opportunities and public bids for Canada aviation tenders, Canada uav tenders, Canada drone tenders, Canada aviation software tenders, aviation tenders, Canada arff vehicle tenders, Canada airline tenders, Canada aircraft repair tenders, aerospace tenders, aerial system tenders. Find Canada bids, tenders, bids, procurement, RFPs, RFQs, ICBs. Search for Canada aviation tenders online. The economy of Canada is a highly developed market economy. It is the 9th largest GDP by nominal and 15th largest GDP by PPP in the world. As with other developed nations, the country's economy is dominated by the service industry which employs about three quarters of Canadians. Canada has the third-highest total estimated value of natural resources, valued at US$29.98 trillion in 2019. It has the world's third largest proven oil reserves and is the fourth largest exporter of crude oil. It is also the fourth largest exporter of natural gas. Canada is considered an "energy superpower" due to its abundant natural resources. According to the Corruption Perceptions Index, Canada is perceived as one of the least corrupt countries in the world, and is one of the world's top ten trading nations, with a highly globalized economy. The Toronto Stock Exchange is the eighth-largest stock exchange in the world by market capitalization, listing over 1,500 companies with a combined market capitalization of over US$3 trillion. In 2021, Canadian trade in goods and services reached CA$2.016 trillion. Canada's exports totalled over CA$637 billion, while its imported goods were worth over CA$631 billion, of which approximately CA$391 billion originated from the United States, CA$216 billion from non-U.S. sources. Canada is unusual among developed countries in the importance of the primary sector, with the logging and energy industries being two of Canada's most important. Canada also has a sizable manufacturing sector, based in Central Canada, with the automobile industry and aircraft industry being especially important. With the world's longest coastline, Canada has the 8th largest commercial fishing and seafood industry in the world. Aviation is the activities surrounding mechanical flight and the aircraft industry. Aircraft includes fixed-wing and rotary-wing types, morphable wings, wing-less lifting bodies, as well as lighter-than-air craft such as hot air balloons and airships. Civil aviation includes all non-military flying, both general aviation and scheduled air transport. General aviation includes all non-scheduled civil flying, both private and commercial. General aviation may include business flights, air charter, private aviation, flight training, ballooning, paragliding, parachuting, gliding, hang gliding, aerial photography, foot-launched powered hang gliders, air ambulance, crop dusting, charter flights, traffic reporting, police air patrols and forest fire fighting. Each country regulates aviation differently, but general aviation usually falls under different regulations depending on whether it is private or commercial and on the type of equipment involved. Aviation safety means the state of an aviation system or organization in which risks associated with aviation activities, related to, or in direct support of the operation of aircraft, are reduced and controlled to an acceptable level. It encompasses the theory, practice, investigation, and categorization of flight failures, and the prevention of such failures through regulation, education, and training. Air traffic control involves communication with aircraft to help maintain separation – that is, they ensure that aircraft are sufficiently far enough apart horizontally or vertically for no risk of collision. Controllers may co-ordinate position reports provided by pilots, or in high traffic areas they may use radar to see aircraft positions. In addition to separation from other aircraft, ATC may provide weather advisories, terrain separation, navigation assistance, and other services to pilots, depending on their workload.

GlobalTenders, one of the largest and most trusted sources for Tendering opportunities and Business Intelligence. With the aim of making information easier to access, Global Tenders was established as a business connect platform in 2002. GlobalTenders has more than two decades of experience in tender business.

On GlobalTenders you'll find the most comprehensive and authentic Tenders Database. GlobalTenders collects tender notices, contract awards, procurement opportunities from various sources. Some of sources for Australia Government Contracts and Tenders are:

Government Tenders Sites
Ministry Tenders Sites
Government Tender Bulletins
eTendering System
Central Government Tenders Websites
Public Procurement System
eTender Portal
Tender Periodicals
Government Eprocurement Sites
Government Department Tenders Sites
State Government Tenders Sites
Municipal Corporation Tenders

Global Tenders, through its proprietary algorithms offers an advanced yet simple to use search option through which the notices can be filtered according to the keywords, sectors, regions, product classifier, deadline, estimated cost with an option to export the results or set as daily email alerts.

Invitation to tender

An invitation to tender (ITT, otherwise known as a call for bids or a request for tenders) is a formal, structured procedure for generating competing offers from different potential suppliers or contractors looking to obtain an award of business activity in works, supply, or service contracts, often from companies who have been previously assessed for suitability by means of a supplier questionnaire (SQ) or pre-qualification questionnaire (PQQ).

The term "notice inviting tenders" (NIT) is often used in purchasing in India.

An ITT differs from a request for quotation (RFQ) or a request for proposal (RFP), in which case other reasons (technology used, quality) might cause or allow choice of the second best offer. An RFP is a request for a price from a buyer but the buyer would also expect suggestions and ideas on how the project work should be done. RFPs are thus focused on more than just pricing/cost, they entail a bit of consulting from the contractor or vendor. The closest equivalent to an ITT in the mainstream private sector is an RFP which, since public money is not involved, typically has a less rigid structure.

Typology

Open tenders, open calls for tenders, or advertised tenders are open to all vendors or contractors who can guarantee performance.
Restricted tenders, restricted calls for tenders, or invited tenders are only open to selected pre-qualified vendors or contractors. The tender stage may form part of a two-stage process, the first stage of which (as in the expression-of-interest (EOI) tender call) was itself advertised, resulting in a shortlist of selected suitable vendors.
Sole source tenders, where only one potential supplier is invited to submit a tender.

The reasons for using restricted tenders differ in scope and purpose. Restricted tenders can come about because of:
- confidentiality issues (such as in military contracts)
- the need for expeditiousness (as in emergency situations)
- a need to exclude tenderers who do not have the financial or technical capabilities to fulfill the requirements.

A sole source tender may be used where there is essentially only one suitable supplier of the services or product.

Other types of proposal and terms in use include:
EOI – expression of interest
IFB – invitation for bids
ITN – Invitation to negotiate
ITV – invitation to vendors
RFA – request for applications
RFD – request for documentation
RFI – request for information
RFO – request for offers
RFP – request for proposal
RFQ – request for quotation or request for qualifications
RFS – request for services

The online tender process typically involves the following steps:

Publication of tender notice: The procurement agency publishes the tender notice on their website and other online platforms.
Bid submission: Suppliers access the tender documents online, prepare their bids, and submit them electronically before the deadline.
Bid evaluation: The procurement agency evaluates the bids electronically based on the evaluation criteria specified in the tender documents.
Contract award: The contract is awarded to the successful bidder, and the procurement agency notifies all bidders of the outcome.

Note that the tender process may vary depending on the procurement agency and the type of tender. Therefore, it is essential to carefully review the tender documents and follow the instructions provided.

Some portion of this article uses material from the Wikipedia article "Invitation to tender", which is released under the Creative Commons Attribution-Share-Alike License 3.0. Tags: Canada Aviation Tenders, Canada Aviation Bids, Canada Aviation Global Tenders, Canada Aviation International Tenders, RFPs, RFQs, EOI, ICBs, Contract awards.

Summary:
Saskatchewan Aviation Strategy Consulting Services
Sector:
Services,Aviation,Consultancy
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
19 Jun 2023
Summary:
Rfq 2023-08 Dawson Creek Regional Airport - Flight Tower Air-Handling…
Sector:
Energy, Power and Electrical,Infrastructure and construction,Aviation
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
16 Jun 2023
Summary:
Airport Operations & Maintenance
Sector:
Services,Aviation,Airports
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
15 Jun 2023
Summary:
Town of Oliver Airport Masterplan
Sector:
Infrastructure and construction,Aviation
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
16 Jun 2023
Summary:
Airport Recreational Lands - Expression of Interest
Sector:
Energy, Power and Electrical,Infrastructure and construction,Aviation
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
18 Jun 2023
Summary:
Aircraft Charter From Iqaluit To Kimmirut And Return
Sector:
Machinery and Equipments,Aviation
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
30 May 2023
Summary:
Rfq#23.0055 Aviation Fuel Supply And Delivery
Sector:
Aviation,Oil And Gas
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
15 Jun 2023
Summary:
Aviation Replacement Parts For The Cc138 Twin Otter
Sector:
Energy, Power and Electrical,Aviation
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
09 Jun 2023
Summary:
Airport Authority Performance Review
Sector:
Infrastructure and construction,Aviation
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
20 Jun 2023
Summary:
Airport Operations & Maintenance
Sector:
Services,Aviation,Airports
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
15 Jun 2023