Tender Info 247

Most trusted source for Tendering Opportunities and Business Intelligence since 2002

Canada Airports Tenders and Bids

Get access to latest Canada airport tenders and bids. Find business opportunities and government contracts for Canada airport tenders, aircraft tenders, Canada helicopter tenders, airport engineering tenders, Canada air transport tenders, international airport tenders, Canada airport terminal tenders, taxiway tenders, Canada airport maintenance tenders, Canada airport software tenders, airport runway tenders. Find Canada airport bids, tenders, procurement, RFPs, RFQs, ICBs. The economy of Canada is a highly developed market economy. It is the 9th largest GDP by nominal and 15th largest GDP by PPP in the world. As with other developed nations, the country's economy is dominated by the service industry which employs about three quarters of Canadians. Canada has the third-highest total estimated value of natural resources, valued at US$29.98 trillion in 2019. It has the world's third largest proven oil reserves and is the fourth largest exporter of crude oil. It is also the fourth largest exporter of natural gas. Canada is considered an "energy superpower" due to its abundant natural resources. According to the Corruption Perceptions Index, Canada is perceived as one of the least corrupt countries in the world, and is one of the world's top ten trading nations, with a highly globalized economy. The Toronto Stock Exchange is the eighth-largest stock exchange in the world by market capitalization, listing over 1,500 companies with a combined market capitalization of over US$3 trillion. In 2021, Canadian trade in goods and services reached CA$2.016 trillion. Canada's exports totalled over CA$637 billion, while its imported goods were worth over CA$631 billion, of which approximately CA$391 billion originated from the United States, CA$216 billion from non-U.S. sources. Canada is unusual among developed countries in the importance of the primary sector, with the logging and energy industries being two of Canada's most important. Canada also has a sizable manufacturing sector, based in Central Canada, with the automobile industry and aircraft industry being especially important. With the world's longest coastline, Canada has the 8th largest commercial fishing and seafood industry in the world. An airport is an aerodrome with extended facilities, mostly for commercial air transport. Airports usually consists of a landing area, which comprises an aerially accessible open space including at least one operationally active surface such as a runway for a plane to take off and to land or a helipad, and often includes adjacent utility buildings such as control towers, hangars and terminals, to maintain and monitor aircraft. Larger airports may have airport aprons, taxiway bridges, air traffic control centres, passenger facilities such as restaurants and lounges, and emergency services. Operating airports is extremely complicated, with a complex system of aircraft support services, passenger services, and aircraft control services contained within the operation. Airports revenues are divided into three major parts: aeronautical revenue, non-aeronautical revenue, and non-operating revenue. Aeronautical revenue makes up 56%, non-aeronautical revenue makes up 40%, and non-operating revenue makes up 4% of the total revenue of airports. Air traffic control (ATC) is the task of managing aircraft movements and making sure they are safe, orderly and expeditious. At the largest airports, air traffic control is a series of highly complex operations that requires managing frequent traffic that moves in all three dimensions. Ground control is responsible for directing all ground traffic in designated "movement areas", except the traffic on runways. This includes planes, baggage trains, snowplows, grass cutters, fuel trucks, stair trucks, airline food trucks, conveyor belt vehicles and other vehicles.

GlobalTenders, one of the largest and most trusted sources for Tendering opportunities and Business Intelligence. With the aim of making information easier to access, Global Tenders was established as a business connect platform in 2002. GlobalTenders has more than two decades of experience in tender business.

On GlobalTenders you'll find the most comprehensive and authentic Tenders Database. GlobalTenders collects tender notices, contract awards, procurement opportunities from various sources. Some of sources for Australia Government Contracts and Tenders are:

Government Tenders Sites
Ministry Tenders Sites
Government Tender Bulletins
eTendering System
Central Government Tenders Websites
Public Procurement System
eTender Portal
Tender Periodicals
Government Eprocurement Sites
Government Department Tenders Sites
State Government Tenders Sites
Municipal Corporation Tenders

Global Tenders, through its proprietary algorithms offers an advanced yet simple to use search option through which the notices can be filtered according to the keywords, sectors, regions, product classifier, deadline, estimated cost with an option to export the results or set as daily email alerts.

Invitation to tender

An invitation to tender (ITT, otherwise known as a call for bids or a request for tenders) is a formal, structured procedure for generating competing offers from different potential suppliers or contractors looking to obtain an award of business activity in works, supply, or service contracts, often from companies who have been previously assessed for suitability by means of a supplier questionnaire (SQ) or pre-qualification questionnaire (PQQ).

The term "notice inviting tenders" (NIT) is often used in purchasing in India.

An ITT differs from a request for quotation (RFQ) or a request for proposal (RFP), in which case other reasons (technology used, quality) might cause or allow choice of the second best offer. An RFP is a request for a price from a buyer but the buyer would also expect suggestions and ideas on how the project work should be done. RFPs are thus focused on more than just pricing/cost, they entail a bit of consulting from the contractor or vendor. The closest equivalent to an ITT in the mainstream private sector is an RFP which, since public money is not involved, typically has a less rigid structure.

Typology

Open tenders, open calls for tenders, or advertised tenders are open to all vendors or contractors who can guarantee performance.
Restricted tenders, restricted calls for tenders, or invited tenders are only open to selected pre-qualified vendors or contractors. The tender stage may form part of a two-stage process, the first stage of which (as in the expression-of-interest (EOI) tender call) was itself advertised, resulting in a shortlist of selected suitable vendors.
Sole source tenders, where only one potential supplier is invited to submit a tender.

The reasons for using restricted tenders differ in scope and purpose. Restricted tenders can come about because of:
- confidentiality issues (such as in military contracts)
- the need for expeditiousness (as in emergency situations)
- a need to exclude tenderers who do not have the financial or technical capabilities to fulfill the requirements.

A sole source tender may be used where there is essentially only one suitable supplier of the services or product.

Other types of proposal and terms in use include:
EOI – expression of interest
IFB – invitation for bids
ITN – Invitation to negotiate
ITV – invitation to vendors
RFA – request for applications
RFD – request for documentation
RFI – request for information
RFO – request for offers
RFP – request for proposal
RFQ – request for quotation or request for qualifications
RFS – request for services

The online tender process typically involves the following steps:

Publication of tender notice: The procurement agency publishes the tender notice on their website and other online platforms.
Bid submission: Suppliers access the tender documents online, prepare their bids, and submit them electronically before the deadline.
Bid evaluation: The procurement agency evaluates the bids electronically based on the evaluation criteria specified in the tender documents.
Contract award: The contract is awarded to the successful bidder, and the procurement agency notifies all bidders of the outcome.

Note that the tender process may vary depending on the procurement agency and the type of tender. Therefore, it is essential to carefully review the tender documents and follow the instructions provided.

Some portion of this article uses material from the Wikipedia article "Invitation to tender", which is released under the Creative Commons Attribution-Share-Alike License 3.0. Tags: Canada Airports Tenders, Canada Airports Bids, Canada Airports Global Tenders, Canada Airports International Tenders, RFPs, RFQs, EOI, ICBs, Contract awards.

Summary:
Quality Control Equipment And Information Management System For Cyclotron Laboratory
Sector:
Industrial Automation and Control,Airports,Machinery and Equipments,laboratory equipment and services ,Software Services,Management, business and administration
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
13 Jul 2023
Summary:
Airport Operations & Maintenance
Sector:
Services,Aviation,Airports
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
22 Jun 2023
Summary:
Non-prequalified - Other - Buffalo Narrows Airport Lighting
Sector:
Energy, Power and Electrical,Infrastructure and construction,Aviation,Airports
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
22 Jun 2023
Summary:
RFQ 23-40 Traffic Control Upgrades & Replacement
Sector:
Airports,Transportation
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
23 Jun 2023
Summary:
Project: tender_18270 - Cleaning Services for the Dryden Aviation Services Hangar Building
Sector:
Services,Infrastructure and construction,Environment and Pollution,Aviation,Airports
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
26 Jun 2023
Summary:
Supply and delivery of LED traffic control signal heads, LED replacement units, reflectorized backboards and pedestrian control signal head assemblies
Sector:
Airports,Transportation,Energy, Power and Electrical
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
27 Jun 2023
Summary:
Rfq 23-40 Traffic Control Upgrades & Replacement
Sector:
Airports,Transportation
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
23 Jun 2023
Summary:
F1700-231136 - Canadian Coast Guard Hangar Floor Coating
Sector:
Infrastructure and construction,Building,Airports
Country:
Canada
 
Notice Type:
Request For Expressions of Interest
Deadline:
16 Jun 2023
Summary:
Canadian Rockies International Airport Airfield Lighting Rehabilitation
Sector:
Aviation,Airports,Healthcare and Medicine
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
20 Jun 2023
Summary:
Runway End Identification Lights (REILS)
Sector:
Technology Hardware and Equipment,Energy, Power and Electrical,Airports
Country:
Canada
 
Notice Type:
Invitation for Bids
Deadline:
12 Jun 2023